The workbench of chemical laboratory is an important component of chemical laboratory furniture. Due to frequent contact with water, electricity, gas, chemical substances and materials, as well as various instruments and equipment, it is easy to produce slight scratches on its surface. It affects the beauty of the experimental table. So how to repair the scratch on the table?

1、在日常使用过程中，尽量免除在台面上放置一些尖锐的物体。

1. In the process of daily use, try to avoid placing some sharp objects on the table.

2、不要尽可能地拖动放置在台面上的各个仪器。

2. Do not drag as many instruments as possible on the table.

3、进行高温实验时，实验应在规定的高温放置下进行。

3. When the high temperature test is carried out, the test should be carried out under the specified high temperature.

4、移动化学实验室工作台时，尽量免除碰撞，否则修理起来会比较麻烦。

4. When moving the chemical laboratory workbench, try to avoid collision, otherwise it will be more troublesome to repair.
                 

如何修补简单的划痕？

How to repair simple scratches?

1、如果只是轻微的划痕，先用细砂纸擦拭划坏的表面，注意不要强迫它造成越多的创面；然后使用补漆笔均匀地涂抹划痕。10钟后，油漆干燥并准备使用。

1. If there is only a slight scratch, wipe the scratched surface with fine sandpaper, and be careful not to force it to cause more wounds; then use a touch up pen to evenly smear the scratch. After 10 hours, the paint is dry and ready for use.

2、如果化学实验室工作台上的划痕严重，请先填充划痕，然后抛光，填充涂料，20分钟后使用。

2. If the scratch on the chemical laboratory bench is serious, please fill the scratch first, then polish and fill with paint, and use it after 20 minutes.