山东锐浩实验室装备有限公司专注于山东实验室装修设计,仪器设备,培训一体化工程!
咨询热线:
18654548277(韩经理)

您现在所在的位置 :首页 - 新闻资讯 > 公司新闻 >

公司新闻

news

全国统一咨询热线

18654548277 

山东锐浩实验室装备有限公司

地址:济南市历下区理想嘉园1号楼1310室

服务热线:18654548277(韩经理)

公司新闻

实验室节能减排工作从何做起?

来源:http://www.sdrunjing.com/ 日期:2020-03-16 发布人:锐浩
  为了降低洁净室的能耗,在洁净室的规划设计中应考虑节能问题。合理确定洁净室面积,选择合适的洁净水平,是降低洁净室能耗的主要途径。选用先进、低能耗的公用电力系统和设备;合理确定洁净室围护结构。可采取的节能措施包括:
  In order to reduce the energy consumption of clean room, energy saving should be considered in the planning and design of clean room. The main way to reduce the energy consumption of clean room is to reasonably determine the area of clean room and select the appropriate clean level. Select advanced and low energy consumption public power system and equipment; reasonably determine the enclosure structure of clean room. Energy saving measures available include:
  (1)场地的总体布置,尽量选择空气污染少、粉尘产量小、洁净室应布置在污染少的场地并注意朝向。
  (1) For the general layout of the site, try to choose the site with less air pollution, small dust output and clean room with less pollution and pay attention to the direction.
  当(2)流程布局,减少洁净室的面积或减少的面积严格的洁净室清洁|能净化室内没有设置在这个过程中,设备应该位于清洁部分<正确地确定各种类型的房间的整洁程度,不应该任意增加清洁需求,组织好人流,物流,并安排辅助房间,配合相关选择,做好洁净室、空间布置等。
  When (2) process layout, reducing the area of clean room or reducing the area of strict clean room cleaning | the clean room is not set in this process, the equipment should be located in the cleaning part < correctly determine the cleanliness of various types of rooms, do not arbitrarily increase the cleaning requirements, organize the flow of people, logistics, and arrange auxiliary rooms, Cooperate with the selection of relevant disciplines, do a good job in clean room, space layout, etc.
  (3)合理确定洁净室的建筑形式,减少冷却损失。
  (3) Reasonably determine the construction form of clean room to reduce cooling loss.
  (4)优化净化空调系统的空气处理工艺。
  (4) Optimize the air treatment process of purification air conditioning system.
  实验室
  Laboratory
  (5)尽量减少冷(热)负荷,主要有以下几种方式:
  (5) Try to reduce the cold (hot) load in the following ways:
  (1)减少洁净室主要设备的排气量。
  (1) Reduce the exhaust volume of the main equipment in the clean room.
  减少洁净室空调系统的泄漏<
  Reduce the leakage of clean room air conditioning system<
  (3)减少室内清洁生产设备的热损失;
  (3) Reduce the heat loss of indoor clean production equipment;
  (4)减少洁净室内的灰尘量,减少空气量;
  (4) Reduce the amount of dust and air in the clean room;
  (5)合理选择局部净化/隔离装置/微环境装置;
  (5) Reasonable selection of local purification / isolation device / microenvironment device;
  采取措施减少系统性阻力;
  Take measures to reduce systematic resistance;
  选择低能耗、率的设备;
  Choose the equipment with low energy consumption and high efficiency;
  变风量、变频等。
  Variable air volume, frequency conversion, etc.
山东实验室装修设计
  9. 加强保温措施,选用优质保温材料。
  9. Strengthen heat preservation measures and select high-quality heat preservation materials.
  (6)为提高设备效率,尽可能采用热回收装置:
  (6) In order to improve the efficiency of the equipment, the heat recovery device shall be used as much as possible:
  (1)使用的冰箱、大麻、水泵和换热设备;
  (1) Use efficient refrigerators, marijuana, water pumps and heat exchange equipment;
  (2)设备配置合理,尽量防止大马拉皮尔现象;
  (2) The equipment configuration is reasonable, and the phenomenon of Malabar PIL should be prevented as much as possible;
  (3)采用风冷(热)量回收装置、排冷(热)量^装置;
  (3) Adopt air cooling (heat) quantity recovery device and exhaust cooling (heat) quantity device;
  (4)在适当的条件下使用冰箱的冷热利用装置;
  (4) Use the cold and heat utilization device of the refrigerator under appropriate conditions;
  (5)生产设备的冷热回收;
  (5) Cold and heat recovery of production equipment;
  6. 合理配置公用电力设备,如采用自由冷却系统,热电冷联产。
  6. Reasonable allocation of public power equipment, such as free cooling system, cogeneration of heat, power and cooling.

友情链接: 苏州净化器租赁 自行车车棚