山东润境环境科技有限公司专注于山东实验室装修设计,仪器设备,培训一体化工程!
咨询热线:
0531-67805633
客服热线 :18654548277 13658639555

您现在所在的位置 :首页 - 新闻资讯 > 公司新闻 >

公司新闻

news

全国统一咨询热线

0531-67805633 

山东润境环境科技有限公司

地址:济南市历下区理想嘉园1号楼1310室

服务热线:
18654548277
13658639555

咨询热线:0531-67805633

公司新闻

检测类实验室要怎么装修?

来源:http://www.sdrunjing.com/ 日期:2020-07-10 发布人:润静小编
  一般来说,我们普通的房屋装修比较侧重于装饰美观方面,而检测类实验室属于功能性的室内空间,更侧重于使用。因此,检测类实验室装修需要根据空间功能来设计装修,且要求简洁大方。
  Generally speaking, our common house decoration focuses on the beautiful decoration, while the testing laboratory belongs to the functional indoor space, which is more focused on the use. Therefore, the decoration of testing laboratory needs to be designed and decorated according to the space function, and the requirement is simple and generous.
  检测类实验室要怎么装修?
  How to decorate the testing laboratory?
  检测类实验室建设的主要目标就是为科研创造有利条件,保护人体、仪器、设备、样品和数据的安全。作为一家提供实验室建设技术与服务十余年的公司,山东实验室装修设计根据多年经验总结了以下装修要求:
  The main goal of testing laboratory construction is to create favorable conditions for scientific research and protect the safety of human body, instruments, equipment, samples and data. As a company providing laboratory construction technology and service for more than ten years, Shandong laboratory decoration design summarizes the following decoration requirements based on years of experience:
  1.办公区域与实验室区域分开:为了便于控制与管理,办公大厅须设有准入系统,凭卡入内;不同实验室须有不同级别的准入授权及门禁控制;
  1. The office area is separated from the laboratory area: in order to facilitate control and management, the office hall must be equipped with an access system, which can be entered by card; different laboratories must have different levels of access authorization and access control;
  2.一般来说,除了主实验室外,还需要有辅助的实验房间与之配套,
                山东实验室装修设计
 
  3.实验室产生的废气、废液、固体废弃物以及废水都有相关的排放标准。废气需要分类、分系统收集,经处理达到国家有关排放标准后才可排放;废液和固体废弃物需要分类收集,交由有资质的相关单位处理;废水应单独收集处理达标后再排放;
  3. The waste gas, waste liquid, solid waste and waste water produced in the laboratory have relevant discharge standards. The waste gas needs to be collected by classification and system, and can be discharged after being treated to meet the relevant national emission standards; the waste liquid and solid waste need to be collected by classification and handed over to the relevant qualified units for treatment; the waste water should be collected separately and treated before discharge after reaching the standard;
  4.清洁区与污染区分开,人流、物流和污物流分开,这样能避免实验室的样品交叉污染,保证实验数据的正确性;
  4. The clean area should be separated from the pollution area, and the human flow, logistics and sewage flow should be separated, so as to avoid the cross contamination of the samples in the laboratory and ensure the correctness of the experimental data;
  5.预处理室和仪器分析室分开,不同种类可能相互干扰的仪器室以及不同种类的样品处理室分开;
  5. The pretreatment room is separated from the instrument analysis room, and different kinds of instrument rooms that may interfere with each other and different kinds of sample processing rooms are separated;
  6.特殊的检测类实验室(如精密仪器室和恒温恒湿实验室)严禁安装自动水喷淋系统,应安装火灾感应系统,采用气体灭火器等设备。注意精密仪器需要采用双电源供电,独立接地保护;
  6. Special testing laboratories (such as precision instrument room and constant temperature and humidity laboratory) are not allowed to install automatic water spray system. Fire induction system and gas fire extinguisher should be installed. Attention should be paid to the use of double power supply and independent grounding protection for precision instruments;
  7.在常温常压下,易爆、易燃及排出有毒气体的危险废物必须先进行预处理,再做妥善贮存;不水解、不挥发的固体危险废物可在贮存设施内分别堆放;
  7. Under normal temperature and pressure, explosive, inflammable and toxic gas discharged hazardous wastes must be pretreated before proper storage; non hydrolytic and non volatile solid hazardous wastes can be stacked separately in the storage facilities;
  8.不相容的危险废物不可混装在在同一容器内,无法装入常用容器内的危险废物可装在防漏胶袋内;如液体和半固体危险废物装载在同一容器,须保证容器内留有足够的空间,容器顶部与液体表面之间保留100mm以上的空间;
  8. Incompatible hazardous wastes shall not be mixed in the same container, and hazardous wastes that cannot be put into common containers can be packed in leak proof plastic bags; if liquid and semi-solid hazardous wastes are loaded in the same container, sufficient space shall be reserved in the container, and more than 100 mm space shall be reserved between the top of the container and the liquid surface;
  9.严格选择用材,不同功能的空间须使用不同要求的耐腐蚀材料,保证其使用寿命及稳定性均达到国内先进实验室的水平。
  9. Strictly select materials and use different corrosion-resistant materials in different functional spaces to ensure that their service life and stability reach the level of domestic advanced laboratories.
  ,山东实验室装修设计提醒大家,"构"应先于"建",只有"构"清楚了,才可以开始"建"。正确的检测类实验室建设流程应该要先进行实验室的工艺设计,在满足实验室工艺要求的前提下,才能进行实验室的土建设计哦。想要了解更多相关内容请继续关注我们http://www.sdrunjing.com网站。
  Finally, the decoration design of Shandong laboratory reminds us that "construction" should precede "construction". Only when the "structure" is clear, can we start "construction". The correct construction process of testing laboratory should first carry out the process design of the laboratory. On the premise of meeting the technological requirements of the laboratory, the civil engineering design of the laboratory can be carried out. If you want to know more about it, please stay with us http://www.sdrunjing.com Website.


友情链接: 苏州净化器租赁 自行车车棚